interactive catalog replaces catalog pages sensing and control honeywell inc. 11 west spring street freeport, illinois 61032 honeywell sensing and control has replaced the pdf product catalog with the new interactive catalog . the interactive catalog is a power search tool that makes it easier to find product information. it includes more installation, application, and technical information than ever before. click this icon to try the new interactive catalog.
solid state sensors digital magnetoresistive sensor 2 ss 52m s erie s honeywell sensing and control features/benefits ? advanced electronic circuitry including a band-gap regulator. can be used with a wide range of supply voltages. ? low gauss operation can extend sensing distance to one inch or more, depending on magnet size. ? digital current sinking output ? omnipolar - can be operated with either north or south magnetic pole. will simplify installation in single pole applications and double the resolution in rotating magnet applications. ? operating speed: 0 to over 100khz; will keep up with fast moving targets. ? 3-pin, in-line pc board terminals on 0.050-inch mounting centers (0.100 centers available on tape for automated assembly). ? operating temperature range: -40 to +150c (-40 to 302f) allows use in extreme temperature conditions. ? surface mount style available 2ss52m-s for mounting flexibility. typical applications ? cylinder position sensing ? elevator sensor ? laptop lid sensor ? geartooth sensor ? blood analyzer ? industrial proximity sensor ? high-resolution magnetic encoder 2ss52m series position sensors have a built-in magnetoresistive bridge integrated on silicon and encapsulated in a plastic package. the integrated circuit also includes a band-gap regulator and a digital output that will respond to very low magnetic fields. though the signal is identical to our digital hall effect sensors, it can be achieved by magnetoresistive sensors at much greater sensor-to-magnet distances. catalog listings 2ss52m, 2ss52m-s, 2ss52m-t2, 2SS52M-T3 (see reverse side for mounting dimensions) operating characteristics 2ss52m/2ss52m-s supply voltage (vdc) 3.8 to 30 supply current (ma max.) operate 11 release 10 output type sink output voltage (v) @ 20m a .40 max. output current (ma max.) 20 leakage current ( a, max.) 10 operating temperature -40 to +150c magnetics type omnipolar magnetic char. & temp. gauss mt -40 to +150c max. op. 25 2.5 min. rel. 4 0.4 max. dif. 8 0.8 mt = millitesla operating mode (arrows indicate direction of magnetic flux.) 2ss52m sensors are operated by magnetic fields (north or south pole) parallel to the magnetoresistive element. note: due to the inherent high sensitivity of 2ss52m sensors, stray magnetic fields that are parallel to the ic may effect operation.
solid state sensors digital magnetoresistive sensor 2ss52m serie s sensing and control honeywell inc. 11 west spring street freeport, illinois 61032 printed with soy ink on 50% recycled paper 005840-0-en il50 glo 0199 printed in usa www.honeywell.com/sensing warranty/remedy honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. contact your local sales office for warranty information. if warranted goods are returned to honeywell during the period of coverage, honeywell will repair or replace without charge those items it finds defective. the foregoing is buyer?s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. specifications may change without notice. the information we supply is believed to be accurate and reliable as of this printing. however, we assume no responsibility for its use. while we provide application assistance personally, through our literature and the honeywell web site, it is up to the customer to determine the suitability of the product in the application. for application assistance, current specifications or name of the nearest authorized distributor, contact a nearby sales office. or call: 1-800-537-6945 usa 1-800-737-3360 canada 1-815-235-6847 international fax 1-815-235-6545 usa internet www.honeywell.com/sensing info@micro.honeywell.com mounting dimensions suffi x description nominal lead spacing nominal "e" dim length parts per container (none) standard, bulk pack .050 .590 1000/bag s surface mount, bulk pack .050 .125 1000/bag t2 tape, ammopack .100 .590 5000/box t3 tape, ammopack .050 .590 5000/box
|
